VMAX-102 Ventialtor

VMAX-102-12

Deflectors: 1
Base: 45 degree cant.
Height : 231/4 in.
Ventilation area: 100 to 150 ft2
Click here to read more about
VMAX-102-12 ventilators

VMAX-102 Ventialtor

VMAX-101-12

Deflectors: 4
Base: 45 degree cant.
Height : 241/2 in.
Ventilation area: 151 to 400 ft.2
Click here to read more about
VMAX-101-12 ventilators

VMAX-201Ventialtor

VMAX-201-12-MB

Deflectors: 4
Base: insulated interior
Height : 241/2 in.
Ventilation area: 151 to 450 ft.2
Click here to read more about
VMAX-201-12-MB ventilators

VMAX-102 Ventialtor

VMAX-102-12-MB

Deflectors: 1
Base: insulated interior
Height : 241/4 in.
Ventilation area: 100 to 150 ft.2
Click here to read more about
VMAX-102-12-MB ventilators

MODEL
VMAX-102-12

Deflectors: 1
Base: 45 degree cant.
Height : 231/4 in.
Ventilation area: 100 to 150 ft2

Unlike the turbine, the Maximum Ventilators are CSA approved and do not require to rotate to prevent water or snow infiltrations. Its unique storm proof system prevents infiltrations while at the same time capturing the wind flow from all directions and at wind velocities as low as 6 km./hr. (4 mi./hr.). With this combination of technology, wind and pressure differentials, a “chimney or, vacuum effect” results in drawing the stale air and moisture out, thus preventing moisture & heat build-up within the attic space.

This model has been designed to be installed onto a wooden curb. The thickness of the wooden curb in conjunction with the thickness of the roofing membrane will determine the size of the ventilator required. The interior dimension of the wood curb should equal to the opening in the deck to allow for unobstructed air flow. The suggested roof area for one (1) ventilator model VMAX-102-12 has been calculated based on a 10 in. x 10 in. opening or (hole) of curb and roof deck.

Model : VMAX-102-12
Deflectors : 1
Net Free Evacuation : 96 in.2
Suggested Ventilation Area : 100 to 150 ft.2
Tested Extraction Rate : 134 CFM
Base Flashing : 45 degree cant flashing
Storm Proof : Unique precision engineered deflector system
Solid : Built of structural galvanized steel
Standard Gauge : 24 & 26
Rodent Proof : Built-in galvanized wire mesh screen
Finish : Interior and exterior powder coated polyester baked paint with UV protection
Warranty : Limited Lifetime Warranty on all manufacturing defects, 5 years on paint & corrosion
Available Colours : Black, brown, grey, and white
Compliances : CSA, CAN-3-A930M82, ASTM-527

A limited selection of special colours is available at a slight premium.
Click here to view our special colour options.

VMAX-102-12

DIMENSIONS AND SPECIAL CHARACTERISTICS – 102

MODEL
VMAX-101-12

Deflectors: 4
Base: 45 degree cant.
Height : 241/2 in.
Ventilation area: 151 to 400 ft.2

vent-chart-1Unlike the turbine, the Maximum Ventilators are CSA approved and do not require to rotate to prevent water or snow infiltrations. Its unique storm proof system prevents infiltrations while at the same time capturing the wind flow from all directions and at wind velocities as low as 6 km./hr. (4 mi./hr.). With this combination of technology, wind and pressure differentials, a “chimney or, vacuum effect” results in drawing the stale air and moisture out, thus preventing moisture & heat build-up within the attic space.

This model has been designed to be installed onto a wooden curb. The thickness of the wooden curb in conjunction with the thickness of the roofing membrane will determine the size of the ventilator required. The interior dimension of the wood curb should equal to the opening in the deck to allow for unobstructed air flow. The suggested roof area for one (1) ventilator model VMAX-101-12 has been calculated based on a 10 in. x 10 in. opening or (hole) of curb and roof deck.

Model : VMAX-101-12
Deflectors : 4
Net Free Evacuation : 144 in2.
Tested Extraction Rate : 418 CFM
Suggested Ventilation Area : 151 to 400 ft2. (Refer to chart)
Base Flashing : 45 degree cant flashing
Storm Proof : Unique precision engineered deflector system
Solid : Built of structural galvanized steel
Standard Gauge : 24 & 26
Rodent Proof : Built-in galvanized wire mesh screen
Finish : Interior and exterior powder coated polyester baked paint with UV protection
Warranty : Limited Lifetime Warranty on all manufacturing defects, 5 years on paint & corrosion
Available Colours : Black, brown, grey, and white
Compliances : CSA, CAN-3-A930M82, ASTM-527

A limited selection of special colours is available at a slight premium.
Click here to view our special colour options.

VMAX-102-12

DIMENSIONS AND SPECIAL CHARACTERISTICS – 101

MODEL
VMAX-102-12-MB

Deflectors: 1
Base: insulated interior
Height : 241/4 in.
Ventilation area: 100 to 150 ft.2

Unlike the turbine, the Maximum Ventilators are CSA approved and do not require to rotate to prevent water or snow infiltrations. Its unique storm proof system prevents infiltrations while at the same time capturing the wind flow from all directions and at wind velocities as low as 6 km./hr. (4 mi./hr.). With this combination of technology, wind and pressure differentials, a “chimney or, vacuum effect” results in drawing the stale air and moisture out, thus preventing moisture & heat build-up within the attic space.

All in one, no need of a wood curb, this model has been designed to allow you to install the roofing membrane onto the base flashing the same way you would a wood curb. We have made an allowance for the membrane so that the neck of the ventilator will go over both the flashing and the membrane.

Model : VMAX-102-12-MB
Deflectors : 1
Net Free Evacuation : 96 in2.
Tested Extraction Rate : 134 CFM
Suggested Ventilation Area : 100 to 150 ft2.
Base Flashing : Flat base, insulated interior flashing
Storm Proof : Unique precision engineered deflector system
Solid : Built of structural galvanized steel
Standard Gauge : 24 & 26
Rodent Proof : Built-in galvanized wire mesh screen
Finish : Interior and exterior powder coated polyester baked paint with UV protection
Warranty : Limited Lifetime Warranty on all manufacturing defects, 5 years on paint & corrosion
Available Colours : Black, brown, grey and white
Compliances : CSA, CAN-3-A930M82, ASTM-527

A limited selection of special colours is available at a slight premium.
Click here to view our special colour options.

VMAX-102-12

DIMENSIONS AND SPECIAL CHARACTERISTICS – 102-MB

MODEL
VMAX-201-12-MB

Deflectors: 4
Base: insulated interior
Height : 241/2 in.
Ventilation area: 151 to 450 ft.2

vent-chart-2Unlike the turbine, the Maximum Ventilators are CSA approved and do not require to rotate to prevent water or snow infiltrations. Its unique storm proof system prevents infiltrations while at the same time capturing the wind flow from all directions and at wind velocities as low as 6 km./hr. (4 mi./hr.). With this combination of technology, wind and pressure differentials, a “chimney or, vacuum effect” results in drawing the stale air and moisture out, thus preventing moisture & heat build-up within the attic space.

All in one, no need of a wood curb, this model has been designed to allow you to install the roofing membrane onto the base flashing the same way you would a wood curb. We have made an allowance for the membrane so that the neck of the ventilator will go over both the flashing and the membrane.

Model : VMAX-201-12-MB
Deflectors : 4
Net Free Evacuation : 121 in2.
Tested Extraction Rate : 351 CFM
Suggested Ventilation Area : 151 to 450 ft2. (Refer to chart above)
Base Flashing : Flat base with insulated interior
Storm Proof : Unique precision engineered deflector system
Solid : Built of structural galvanized steel
Standard Gauge : 24 & 26
Rodent Proof : Built-in galvanized wire mesh screen
Finish : Interior and exterior powder coated polyester baked paint with UV protection
Warranty : Limited Lifetime Warranty on all manufacturing defects, 5 years on paint & corrosion
Available Colours : Black, brown, grey, and white
Compliances : CSA, CAN-3-A930M82, ASTM-527

A limited selection of special colours is available at a slight premium.
Click here to view our special colour options.

VMAX-102-12

DIMENSIONS AND SPECIAL CHARACTERISTICS – 201-MB

Architects

Looking for detailed ventilator and trap specifications for architects and building professionals?

Ventilation Maximum footer logo

website design and development by Emmatt Digital Solutions Inc.