Allows ventilation up to 450 sq. Ft. Per unit
Specifications and characteristics
Has no moving parts, requires no electricity, it is completely silent and maintenance free.
Wall Exhaust Traps
With 6 models to choose from, these exhaust vents will give you peace of mind. Limited Lifetime Warranty on all manufacturing de-fects, 5 years on paint & corrosion.
For more colors available, consult our charter
3 in. diameter wall mount exhaust vent with 9 in. tailpipe.
4 in. diameter wall mount exhaust vent with 9 in. tailpipe.
4 in. diameter wall mount exhaust vent with 3 in. tailpipe.
5 in. diameter wall mount exhaust vent with 9 in. tailpipe.
6 in. diameter wall mount exhaust vent with 9 in. tailpipe.
3 ¼ in. X 10 in. rectangular wall mount exhaust vent with 9 in. tailpipe.
You are a proffessional and want to know more about our products, visit our partners section
Buy our products from our many distributors
Other models and accessories
Replacement head for any 12 in. round ventilator. Ventilation area: 800 to 1 200 ft2
Special order : Custom made to the slope of the roof. An insulated duct is installed on the ridge of the roof, to assure an efficient ventilation between the joists of the roof.
Accessoire Ridge Flashing
Ridge flashing, adapters and extensions.
Special orders only. Manufacturing delays may vary depending on season. Available Colours : Black, brown and grey.
Closely intertwined fibreglass media filter, increasing in density in the direction of the air passage to increase its non-migratory adhesive retention capacity. The ½’’ media is used for residential, commercial and industrial applications and has an average efficiency of approximately 20%.
The retention pan is constructed of galvanized steel consisting of a 12in x 12in sized pan up to 32in x 32in and 4in high. The pan includes 4 metal straps, one on each corner, for installation and its finish is prewashed with phosphate treatment and then coated with baked polyester powder paint, standard colours: grey, brown and black.
Counter flashing made of galvanised steel to the exact size of the ventilators body and/or cathedral systems. Counter flashing required for steel roof installations of height 102mm (4in) by 102mm (4in) shoulder for ventilators and of height 76mm (3in) by 76mm (3in) shoulder for cathedral systems.